Puresaf Trade

Fiber Cement

COLOREX

SELF-COLORED PRODUCTION

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Flat

Flat Sheet Fibre Cement Board

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 2500/2800/3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Mono

Stucco Textured Fibre Cement Board

EM010

EkobordMono, commonly known as a fibre cement plate, is a cellulose fiber reinforced and cement based plate which can be used in all kinds of interior and exterior surface coatings with an A1 class non-flammability certificate. The flat plates that are called mono are produced entirely from natural materials. They are widely used in prefabricated buildings and in different decoration solutions.

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 3000 mm

Special production and cutting are performed according to the project.

Projects

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Wood

Wood Textured Fibre Cement Board

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 2500/2800/3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Stone

Stone Textured Fibre Cement Board

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 2500/2800/3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Line

Line Textured Fibre Cement Board

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 2500/2800/3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board

Ekobord Plaster

Stucco Textured Fibre Cement Board

Product Areas Product Areas
Siding
Exteriors
Interior Decorative Plating
Column Facing
Wall Applications
Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings
Suspended Ceiling (8 mm poducts)

Certified and Tested.

Natural and odorless raw materials are used. There is no toxic gas emission.

Class A1 is incombustible according to EN-13501-1. It helps put out the fire.

Ekobord fibercement boards alone provide 28 Db sound insulation

Properties

Thickness

8 mm - 14 mm (By increasing 2 mm)

Standard Production Dimensions

(width) 1250 x (lenght) 2500/2800/3000 mm

Special production and cutting are performed according to the project.

TECHNICAL SPECIFICATIONS

Tested according to ISO quality management system of EN 12467
Material Properties
Category A
Category B
Category D
Apparent Density (g/cm3)
~1,40
~1,35
~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions
≥7
≥7
-
Bending Strength (N/mm2) (MPa) (laboratory conditions)
>10
>10
>10
Modulus of Elasticity (N/mm2) (MPa)
>5500
>5000
>6000
Porosity (%)
~40
Thermal Conductivity - (W/m.K)
<0,20
<0,20
<0,26
Thermal Expansion Coefficient - (mm/mK)
<0,005
Thickness
Flat boards 10%, Textured boards -10% to +15%
Tolerances
Width/Length (mm)
±3,75 / ±5
Edge Smoothness (%)
±0,1
Compliance to EN 12467 standard
Fire Resistancy
A1
Water Impermeability
OK
Warm Water Test
OK
Frost Resistance
OK
Asbestos
NT type (non-asbestos) board